Archive

UDK: 624.059.1.002.23:666.97.03

Published: Građevinar 64 (2012) 7
Paper type: Original scientific paper
Download article (Croatian): PDF
Download article (English): PDF
View count: 366

Influence of construction technology on the adhesion of remedial concrete

Marijan Skazlić, Krunoslav Mavar

Abstract

An experimental study aimed at determining influence of individual parameters on the quality of remedial work is undertaken by varying the following factors: quality of damaged concrete, technology for preparing surface for remedial work, and types of remedial concrete. The results obtained are analyzed using the newly introduced criterion for theadhesion of concrete re-profiling materials. Advantages gained by the use of the concrete surface hydro-demolition and sanding procedure, latex-modified remedial concrete with bonding layer, and siliceous concrete without the bonding layer, are presented.

Keywords
hydro-demolition, sanding, pneumatic treatment, concrete surface preparation, remedial concretes/mortars

HOW TO CITE THIS ARTICLE:

Skazlić, M., Mavar, K.: Influence of construction technology on the adhesion of remedial concrete, GRAĐEVINAR, 64 (2012) 7, doi: https://doi.org/10.14256/JCE.672.2012

OR:

Skazlić, M., Mavar, K. (2012). Influence of construction technology on the adhesion of remedial concrete, GRAĐEVINAR, 64 (7), doi: https://doi.org/10.14256/JCE.672.2012

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Skazlic Marijan
Marijan Skazlić
University of Zagreb,
Faculty of Civil Engineering
Mavar Krunoslav
Krunoslav Mavar
Institut IGH d.d. Zagreb