Archive

UDK: 666.971.002.23
DOI: n/a

Published: Građevinar 59 (2007) 9
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Influence of cure on the properties of polymer-modified mortars

Samo Lubej, Andrej Ivanič

Abstract

The use of propylene-fibre reinforced mortar in the remedy of the chimney stack sheathing at the Šoštanj thermal power plant in Slovenia is presented. The fibre reinforced mortar quality analysis is presented for various preparation, placing and cure conditions. Physicomechanical properties of samples taken from the structure are compared with properties of samples prepared in laboratory. The authors conclude that the short-term wet curing is required for polymer-modified mortars.

Keywords
polymers, modified fibre reinforced mortar, thermal power plant in Šoštanj sample, physico-mechanical properties, mortar

HOW TO CITE THIS ARTICLE:

Lubej, S., Ivanič, A.: Influence of cure on the properties of polymer-modified mortars, GRAĐEVINAR, 59 (2007) 9

OR:

Lubej, S., Ivanič, A. (2007). Influence of cure on the properties of polymer-modified mortars, GRAĐEVINAR, 59 (9)
Authors:

Samo Lubej
University of Maribor
Faculty of Civil Engineering

Andrej Ivanič
University of Maribor
Faculty of Civil Engineering