Archive

UDK: 625.11.002.2
DOI: n/a

Published: Građevinar 55 (2003) 2
Paper type: Professional paper
Download article (Croatian): PDF
Download article (English): n/a

Influence of rail-end curvature on track geometry

Ante Goran Bajić

Abstract

Track geometry problems and errors in welding zones, due to curvature at grooved rail ends, are presented. The measurement and comparison of measurement results according to different standards are presented on an actual example. The influence of curvature of grooved rail ends on the increase in force, acceleration and deformation, occurring at the moment a vehicle passes over a deformed rail in welding zone, is shown in horizontal and vertical plane.

Keywords
railways, track, rail, end curvature of grooved rails, weld, traffic

HOW TO CITE THIS ARTICLE:

Bajić, A. G.: Influence of rail-end curvature on track geometry, GRAĐEVINAR, 55 (2003) 2

OR:

Bajić, A. G. (2003). Influence of rail-end curvature on track geometry, GRAĐEVINAR, 55 (2)
Authors:

Ante Goran Bajić
University of Zagreb,
Faculty of Civil Engineering