Archive

UDK: 624.043+624.012.45:69.009.182
DOI: n/a

Published: Građevinar 62 (2010) 11
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a
View count: 1946

Tables for the design of reinforced-concrete profiles according to HRN EN 1992

Zorislav Sorić, Josip Galić, Tomislav Kišiček

Abstract

The procedure used for calculating parameters needed in the bending strength design of reinforced-concrete profiles is described. The need to prepare design tables is justified by the presence of concrete grades higher than C50/60 in HRN EN 1992, and also by different definition of the design strength of concrete as given in individual standards. That is why existing tables can not be used for higher grades of concrete. Design tables with separate presentation of each grade of concrete are given in the paper.

Keywords
design, bending, HRN EN 1992, reinforced-concrete profile, concrete grade, concrete strength

HOW TO CITE THIS ARTICLE:

Sorić, Z., Galić, J., Kišiček, T.: Tables for the design of reinforced-concrete profiles according to HRN EN 1992, GRAĐEVINAR, 62 (2010) 11

OR:

Sorić, Z., Galić, J., Kišiček, T. (2010). Tables for the design of reinforced-concrete profiles according to HRN EN 1992, GRAĐEVINAR, 62 (11)
Authors:

Zorislav Sorić
University of Zagreb,
Faculty of Civil Engineering

Josip Galić
University of Zagreb,
Faculty of Civil Engineering
Kiisicek WEB
Tomislav Kišiček
University of Zagreb,
Faculty of Civil Engineering