Archive

Published: Građevinar 70 (2018) 8
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): PDF
View count: 0

Methodology for defining the design storm for sizing the infiltration system

Nino Krvavica, Krešimir Jaredić, Josip Rubinić

Abstract

A methodology aimed at defining design storm for sizing infiltration systems, as a part of the stormwater management according to the low impact development approach, is presented in the paper. The proposed analyses are based on numerical models for simulating the runoff and discharge of rainfall into infiltration systems. Preliminary design-storm curves for Rijeka are developed, and results of the numerical model sensitivity analysis are presented. An example of the infiltration system design is also shown. The importance of successive analysis of different durations of rainfall, so as to define a critical design situation, is emphasized.

Keywords
LID, BMP, stormwater management, design storm, kinematic wave, rainfall duration

HOW TO CITE THIS ARTICLE:

Krvavica, N., Jaredić, K., Rubinić, J.: Methodology for defining the design storm for sizing the infiltration system, GRAĐEVINAR, 70 (2018) 8, pp. 657-669, doi: https://doi.org/10.14256/JCE.2317.2018

OR:

Krvavica, N., Jaredić, K., Rubinić, J. (2018). Methodology for defining the design storm for sizing the infiltration system, GRAĐEVINAR, 70 (8), 657-669, doi: https://doi.org/10.14256/JCE.2317.2018

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
NinoKrvavica WEB
Nino Krvavica
University of Rijeka,
Faculty of Civil Engineering

Krešimir Jaredić
University of Rijeka
Faculty of Civil Engineering
jr portfelj
Josip Rubinić
University of Rijeka
Faculty of Civil Engineering