Archive

Published: Građevinar 69 (2017) 5
Paper type: Subject review
Download article (Croatian): PDF
Download article (English): PDF

Shear connection with groups of headed studs

Milan Spremić, Zlatko Marković, Jelena Dobrić, Milan Veljković, Dragan Budjevac

Abstract

The behaviour and characteristics of the elements of prefabricated composite steel and concrete structures are determined by behaviour of the longitudinal shear connection. Headed studs in groups are most frequently used for forming longitudinal shear connection of prefabricated composite beams. The results of experimental research and advanced numerical models of shear connections, obtained using groups of headed studs, are presented in the paper. When headed studs are arranged in groups, it is recommended to use the headed studs with the height greater than the 4d height prescribed by the Eurocode.

Keywords
shear connection, groups of headed studs, composite prefabricate beams

HOW TO CITE THIS ARTICLE:

Spremić, M. ., Marković, Z., Dobrić, J., Veljković, M., , D. B.: Shear connection with groups of headed studs, GRAĐEVINAR, 69 (2017) 5, pp. 379-386, doi: https://doi.org/10.14256/JCE.1701.2016

OR:

Spremić, M. ., Marković, Z., Dobrić, J., Veljković, M., , D. B. (2017). Shear connection with groups of headed studs, GRAĐEVINAR, 69 (5), 379-386, doi: https://doi.org/10.14256/JCE.1701.2016

LICENCE:

Creative Commons License
This paper is licensed under a Creative Commons Attribution 4.0 International License.
Authors:
Milan Spremic WEB
Milan Spremić
University of Belgrade
Faculty of Civil Engineering
zlatko markovic WEB
Zlatko Marković
University of Belgrad,
Faculty of Civil Engineering
Dobric
Jelena Dobrić
University of Belgrad,
Faculty of Civil Engineering
Milan Veljkovic WEB
Milan Veljković
Delft University of Technology
Faculty of Civil Engineering and Geosciences

Dragan Budjevac
University of Belgrade
Faculty of Civil Engineering